Printer & Hardware Setup

Configure a receipt printer and run a print test

The browser workspace includes printer settings and a Test Print button using the browser print dialog. Saved printer names do not establish direct USB or network printer integration.

Prepare the printer

  1. Connect the printer and install the manufacturer’s driver on the computer used for billing.
  2. Use the operating system’s printer test to confirm that the printer works outside RestroPOS.
  3. Check the actual paper width installed in the printer.

Review RestroPOS settings

  1. Open Settings and choose Printer Settings.
  2. Review the receipt printer, kitchen printer and receipt width fields. The settings page offers 80 mm and 58 mm options.
  3. Save the configuration, then use Test Print to open the browser print dialog.
  4. Select the intended printer and verify paper size, margins and scaling in the browser dialog.

Check the actual receipt

Print a bill from the supported browser order workflow and inspect the result. Confirm the restaurant name, item totals, tax details and footer fit the paper. A general page print test and a formatted receipt may look different.

If printing fails

Try an operating system test first. If that works, check the browser-selected printer and paper settings. Do not assume an enabled automatic-printing option means unattended printing is supported on your device. Send support the device, browser, printer model and a description of the failure.

WE’RE HERE TO HELP

A little help goes a long way.

Can’t find your answer? Tell our support team what you need.

Contact support